====================================================================
Software Kit v4.02-01
June 25, 2001

Copyright (c) 1994-2001 Mylex Corporation.
All rights reserved.
====================================================================

 - Double-Click on the file "mdacw2k.exe"
 - Follow the instructions on the screen


  Name    : Mylex DAC Driver
  O/S     : Windows 2000
  Version : 6.03-03
  Date    : 06/14/2001
  Platform: Intel


Insert a blank high-density diskette in drive A:.
Press ENTER to extract, or ESC to exit -

Following files will be extracted to the floppy disk.

05/16/01  03:40p                 2,332 txtsetup.oem
06/14/01  01:07p               180,656 dac960nt.sys
05/16/01  02:24p                 3,108 dac960p.inf
05/16/01  02:22p                 3,062 dac1164p.inf
06/14/01  01:07p               180,656 dac2w2k.sys
05/16/01  02:23p                 3,059 ar160.inf
05/16/01  02:23p                 3,059 ar170.inf
05/16/01  02:24p                 3,059 ar352.inf
05/16/01  02:23p                 3,071 exr2000.inf
05/16/01  02:24p                 3,071 exr3000.inf
 

- If you are planning to upgrade a SCSI Interrupt Steering Logic 
  (SISL) installation or are planning to install Windows 2000 in 
  a new SISL installation, please contact Mylex Support for this 
  procedure.  Do not attempt either procedure until you contact 
  Mylex.

- When installing Windows 2000, do not use the F6 setup procedure  
  on any of the following Mylex controllers:

    - Mylex EXR1100 Disk Array Controllers
    - Mylex DAC960PG/PJ/PR/PT Controllers
    - Mylex AR150, AR200, AR250 Controllers

  The Windows 2000 CD-ROM contains a built in driver for these 
  controllers.  Once the normal Windows 2000 installation procedure 
  is completed, the user should upgrade the Mylex controller driver
  to the version included. See the SWKIT manual for instructions on 
  upgrading the driver.


- The Mylex Accelerated Disk driver (macdisk.sys) is not 
  supported under Windows 2000.

- The Operating System drivers included in this Software kit 4.02
  support Mylex controllers with 4.x firmware or later.


- If you are currently using an existing version of GAM Server, 
  Mylex recommends that you do not uninstall this version prior to 
  upgrading to the version included on this SWKIT CD. With the old 
  version still installed and running, just insert the SWKIT CD and 
  run the new setup.exe application by choosing the 'Install Global 
  Array Manager' option from the Main Menu of the Autorun 
  application.  Follow the procedures documented in the SWKIT 
  Installation Guide and User Manual to install the GAM Server 
  software.

  The reason for this is as follows:
  If an old GAM Server (2.21-xx) is uninstalled and no reboot 
  is performed, installing GAM server from the CD-ROM will 
  result in the GAM Driver not loading on the next reboot.  
  This will not occur if the user installs the new server over 
  the top of the old one while it is still running.

  
  If the existing GAM Server has been uninstalled, be sure to 
  reboot the system before installing the new version from this 
  SWKIT CD-ROM or the files which has been down loaded from the 
  Mylex web site.


- If the GAM Server & Workstation Array Manager are installed on 
  the same system and one of them is uninstalled, the other will 
  no longer work because the GAM Driver will get uninstalled.


Please see the SW Kit 4.02 Release Notes for additional documentation